View PS2913-1-V-AX_8825432.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

r08ds0113ej0200 rev.2.00 page 1 of 12 jan 21, 2016 the mark shows major revised points. the revised points can be easily searched by copying an "" in the pdf file and specifying it in the "find what:" field. pin connection (top view) 1. anode 2. cathode 3. emitter 4. collector 43 12 data sheet ps2913-1 single tr. output, high collector to emitter voltage 4-pin ultra small flat-lead photocoupler description the ps2913-1 is an optically coupled isolator containing a gaas light emitting diode and an npn silicon phototransistor in one package for high density mounting applications. an ultra small flat-lead package has been provided which realizes a reduction in mounting area of about 30% compared with the ps28xx series. features ? ultra small flat-lead package (4.6 (l) ? 2.5 (w) ? 2.1 (h) mm) ? high collector to emitter voltage (v ceo = 120 v) ? high isolation voltage (bv = 2 500 vr.m.s.) ? ordering number of taping product: ps2913-1-f3: 3 500 pcs/reel ? safety standards ? ul approved: ul1577, single protection ? bsi approved: bs en 62368-1, supplementary insulation ? vde approved: din en 60747-5-5 (option) applications ? dc/dc converter ? modem/pc card r08ds0113ej0200 rev.2.00 jan 21, 2016
ps2913-1 e r08ds0113ej0200 rev.2.00 page 2 of 12 jan 21, 2016 package dimensions (unit: mm) 5.00.2 0.15 +0.1 ?0.05 1.27 2.1 max. 0.40.1 2.50.3 4 3 12 r 4.60.2 0.20.1 4.1 min. marking example assembly lot 6 week assembled no. 1 pin mark (nicked corner) company initial (engraved r) 01 13 601 r *1 *1 bar : pb-free year assembled (last 1 digit) ni/pd/au plating last number of type no. : 13 photocoupler construction parameter min. air distance 4 mm creepage distance 4 mm isolation distance 0.4 mm
ps2913-1 e r08ds0113ej0200 rev.2.00 page 3 of 12 jan 21, 2016 ordering information part number order number solder plating specification packing style safety standard approval application part number *1 ps2913-1 ps2913-1-ax pb-free 50 pcs (tape 50 pcs cut) standard products ps2913-1 ps2913-1-f3 ps2913-1-f3- ax (ni/pd/au) embossed tape 3 500 pcs/reel (ul, bsi approved) ps2913-1-v PS2913-1-V-AX 50 pcs (tape 50 pcs cut) ul, bsi approved din en 60747-5-5 ps2913-1-v-f3 ps2913-1-v-f3- ax embossed tape 3 500 pcs/reel (vde 0884-5) approved (option) note: *1. for the application of the safety stand ard, following part number should be used. absolute maximum ratings (t a = 25 ? c, unless otherwise specified) parameter symbol ratings unit diode forward current i f 50 ma forward current derating ? i f / ? c 0.5 ma/ ? c peak forward current *1 i fp 0.5 a power dissipation p d 60 mw reverse voltage v r 6 v detector collector to emitter voltage v ceo 120 v emitter to collector voltage v eco 6 v collector current i c 30 ma power dissipation derating ? p c / ? c 1.2 mw/ ? c power dissipation p c 120 mw isolation voltage *2 bv 2 500 vr.m.s. total power dissipation p t 160 mw operating ambient temperature t a ? 55 to +100 ? c storage temperature t stg ? 55 to +150 ? c notes: *1. pw = 100 ? s, duty cycle = 1% *2. ac voltage for 1 minute at t a = 25 ? c, rh = 60% between input and output. pins 1-2 shorted together, 3-4 shorted together.
ps2913-1 e r08ds0113ej0200 rev.2.00 page 4 of 12 jan 21, 2016 electrical characteristics (t a = 25 ? c) parameter symbol conditions min. typ. max. unit diode forward voltage v f i f = 1 ma 0.9 1.1 1.3 v reverse current i r v r = 5 v 5 ? a terminal capacitance c t v = 0 v, f = 1 mhz 15 pf transistor collector to emitter dark current i ceo i f = 0 ma, v ce = 120v 100 na coupled current transfer ratio (i c /i f ) *1 ctr i f = 1 ma, v ce = 5 v 50 100 200 % collector saturation voltage v ce(sat) i f = 1 ma, i c = 0.2 ma 0.13 0.3 v isolation resistance r i-o v i-o = 1 kv dc 10 11 ? isolation capacitance c i-o v = 0 v, f = 1 mhz 0.4 pf rise time *2 t r v cc = 5 v, i c = 2 ma, r l = 100 ? 10 ? s fall time *2 t f 10 turn-on time *2 t on v cc = 5 v, i f = 1 ma, r l = 5 k ? 80 ? s storage time *2 t s 5 turn-off time *2 t off 50 notes: *1. ctr rank n : 50 to 200 (%) k : 100 to 200 (%) l : 75 to 150 (%) m : 50 to 100 (%) *2. test circuit for switching time input output 90% 10% t r t f t s t d t on v cc v out i f i c pulse input in monitor pw = 100 s duty cycle = 1/10
ps2913-1 e r08ds0113ej0200 rev.2.00 page 5 of 12 jan 21, 2016 typical characteristics (t a = 25 ? c, unless otherwise specified) ambient temperature t a (c) maximum forward current i f (ma) maximum forward current vs. ambient temperature ambient temperature t a (c) transistor power dissipation p c (mw) transistor power dissipation vs. ambient temperature forward voltage v f (v) forward current i f (ma) forward current vs. forward voltage collector to emitter voltage v ce (v) collector current i c (ma) collector current vs. collector to emitter voltage ambient temperature t a (c) collector to emitter dark current i ceo (na) collector to emitter dark current vs. ambient temperature collector saturation voltage v ce(sat) (v) collector current i c (ma) collector current vs. collector saturation voltage 80 40 60 20 0 25 50 75 100 0.5 ma/c 140 100 120 40 60 80 20 25 50 75 100 12 5 0 100 10 1 0.1 0.01 0.0 0.5 1.0 1.5 2.0 0c ?25c ?50c +60c +25c t a = +100c 50 000 0.1 500 5 000 10 10 000 1 000 100 50 5 1 0.5 ?60 0 40 80 ?40 ?20 20 60 100 v ce = 40 v 24 v 10 v 68 4 2 010 10 8 6 4 2 1 ma 0.5 ma 12 i f = 5 ma 2 ma ctr = 100% 0.1 1 10 0.0 0.2 0.4 0.6 0.8 1 .0 1 ma i f = 0.5 ma 2 ma 5 ma ctr = 100% remark the graphs indicate nominal characteristics. ?
ps2913-1 e r08ds0113ej0200 rev.2.00 page 6 of 12 jan 21, 2016 frequency response frequency f (khz) normalized gain gv forward current i f (ma) current transfer ratio ctr (%) current transfer ratio vs. forward current normalized to 1.0 at t a = 25c, i f = 1 ma, v ce = 5 v ambient temperature t a (c) normalized current transfer ratio ctr normalized current transfer ratio vs. ambient temperature switching time t ( s) ? load resistance r l ( ? ) switching time vs. load resistance 1.2 1.4 ?50 1.0 0.8 0.6 0.4 0.2 0.0 ?25 025 50 75 100 0.1 1 10 10 0 0 100 150 200 250 300 1 10 100 1 000 10 000 v ce = 5 v, n = 3 1k 10k 100 k 1 000 k sample a b c 1.2 0.4 0.0 0.8 0.6 0.2 1.0 r l = 1 k ? 510 ? 300 ? 100 ? 50 0 110 0.5 50 100 5 50 i f = 1 ma, v cc = 5 v, ctr = 120% t s t on t off remark the graphs indicate nominal characteristics. ?
ps2913-1 e r08ds0113ej0200 rev.2.00 page 7 of 12 jan 21, 2016 taping specifications (unit: mm) ps2913-1-f3 1.550.05 4.00.1 2.00.05 4.00.1 1.750.1 2.9 max. 0.3 2.90.1 2.40.1 1.5 +0.1 ?0 5.30.1 5.50.05 12.00.2 tape direction outline and dimensions (tape) outline and dimensions (reel) packing: 3 500 pcs/reel 3302.0 1001.0 2.00.5 21.00.8 2.00.5 13.51.0 13.00.2 r r r r
ps2913-1 e r08ds0113ej0200 rev.2.00 page 8 of 12 jan 21, 2016 recommended mount pad dimensions (unit: mm) 4.14 (0.35) 4.7 5.7 1.27 0.8 0.6 24-r0.1 ( ) : reference value remark this drawing is considered to meet air and outer creepage distance 4.0 mm minimum. all dimensions in this figure must be evaluated before use.
ps2913-1 e r08ds0113ej0200 rev.2.00 page 9 of 12 jan 21, 2016 notes on handling 1. recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 ? c or below (package surface temperature) ? time of peak reflow temper ature 10 seconds or less ? time of temperature higher than 220 ? c 60 seconds or less ? time to preheat temperature from 120 to 180 ? c 120 ? 30 s ? number of reflows three or less ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% or less is recommended.) 220?c package surface temperature t (?c) time (s) (heating) to 10 s to 60 s 260?c max. recommended temperature profile of infrared reflow 12030 s (preheating) 180?c 120?c (2) wave soldering ? temperature 260 ? c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 ? c or below (package surface temperature) ? number of times one (allowed to be dipped in solder including plastic mold portion.) ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% or less is recommended.) (3) soldering by soldering iron ? peak temperature (lead part temperature) 350 ? c or below ? time (each pin) 3 seconds or less ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% or less is recommended.) (a) soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (4) cautions ? fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
ps2913-1 e r08ds0113ej0200 rev.2.00 page 10 of 12 jan 21, 2016 2. cautions regarding noise be aware that when voltage is applied suddenly between the photocoupler?s input and output or between collector- emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. measurement conditions of current transfer ra tios (ctr), which differ according to photocoupler check the setting values before use, since the forward current conditions at ctr measurement differ according to product. when using products other than at the specified forwar d current, the characteristics curves may differ from the standard curves due to ctr value variations or the like. therefore, check the charact eristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. usage cautions 1. protect against static electricity when handling. 2. avoid storage at a high temperature and high humidity.
ps2913-1 e r08ds0113ej0200 rev.2.00 page 11 of 12 jan 21, 2016 specification of vde marks license document parameter symbol spec. unit climatic test class (iec 60068-1/ din en 60068-1) 55/100/21 dielectric strength maximum operating isolation voltage test voltage (partial discharge test, procedure a for type test and random test) u pr = 1.6 ? u iorm , p d ? 5 pc u iorm u pr 570 912 v peak v peak test voltage (partial discharge test, procedure b for all devices) u pr = 1.875 ? u iorm , p d ? 5 pc u pr 1 068 v peak highest permissible overvoltage u tr 4 000 v peak degree of pollution (din en 60664-1 vde0110 part 1) 2 comparative tracking index (i ec 60112/din en 60112 (vde 0303 part 11)) cti 175 material group (din en 60664 -1 vde0110 part 1) iii a storage temperature range t stg ?55 to +150 ? c operating temperature range t a ?55 to +100 ? c isolation resistance, minimum value v io = 500 v dc at t a = 25 ? c v io = 500 v dc at t a max. at least 100 ? c ris min. ris min. 10 12 10 11 ? ? safety maximum ratings (maximum pe rmissible in case of fault, see thermal derating curve) package temperature current (input current i f , psi = 0) power (output or total power dissipation) isolation resistance v io = 500 v dc at t a = tsi tsi isi psi ris min. 150 300 500 10 9 ? c ma mw ?
ps2913-1 e r08ds0113ej0200 rev.2.00 page 12 of 12 jan 21, 2016 caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinances when disposi ng of the product. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subjec t to special control) up until final disposal. ? do not burn, destroy, cut, crush, or chemically dissolve the product. ? do not lick the product or in any way allow it to enter the mouth.
all trademarks and registered trademarks are t he property of their respective owners. c - 1 revision history ps2913-1 data sheet rev. date description page summary 3.00 may , 2006 ? first edition issued 1.00 nov 29, 2013 throughout renesas format is applied to this data sheet. p.1 modification of features p.2 modification of package dimensions modification of marking example p.3 modification of ordering information p.4 modification of electrical characteristics p.6 modification of typical characteristics p.7 modification of taping specifications p.9 modification of notes on handling p.11 addition of specification of vde marks license document 2.00 jan 21, 2016 p.1 update of features - safety standards p.3 modification of ordering information
notice 1. descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics do es not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 3. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property right s of third parties by or arising from the use of renesas electronics products or technical information described in this document. no license, express, implied or otherwise, is granted hereby under any paten ts, copyrights or other intellectual property rights of renesas electronics or others. 4. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of renesas electronics product. 5. renesas electronics products are classified according to the following two quality grades: "standard" and "high quality". the recommended applications for each renesas electronics product depends on the product's quality grade, as indicated below. "standard": computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "high quality": transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; an ti-crime systems; and safety equipment etc. renesas electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat t o human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). you must check the quality grade of each renesas electronics product before using it in a particular application. you may not use any renesas electronics product for any application for which it is not intended. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for which the product is not intended by renesas electronics. 6. you should use the renesas electronics products described in this document within the range specified by renesas electronics, e specially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas e lectronics shall have no liability for malfunctions or damages arising out of the use of renesas electronics products beyond such specified ranges. 7. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have spec ific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. further, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compatib ility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. renesas electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. you should not use renesas electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. when exporting the renesas electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. it is the responsibility of the buyer or distributor of renesas electronics products, who distributes, disposes of, or otherwis e places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, renesas electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of renesas electronics products. 11. this document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of renesas e lectronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this documen t or renesas electronics products, or if you have any other inquiries. (note 1) "renesas electronics" as used in this document means renesas electronics corporation and also includes its majority-owned subs idiaries. (note 2) "renesas electronics product(s)" means any product developed or manufactured by or for renesas electronics. http://www.renesas.com refer to "http://www.renesas.com/" for the latest and detailed information. california eastern laboratories, inc. 4590 patrick henry drive, santa clara, california 95054-1817, u.s.a. tel: +1-408-919-2500, fax: +1-408-988-0279 renesas electronics europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k tel: +44-1628-585-100, fax: +44-1628-585-900 renesas electronics europe gmbh arcadiastrasse 10, 40472 dsseldorf, germany tel: +49-211-6503-0, fax: +49-211-6503-1327 renesas electronics (china) co., ltd. room 1709, quantum plaza, no.27 zhichunlu haidian district, beijing 100191, p.r.china tel: +86-10-8235-1155, fax: +86-10-8235-7679 renesas electronics (shanghai) co., ltd. unit 301, tower a, central towers, 555 langao road, putuo district, shanghai, p. r. china 200333 tel: +86-21-2226-0888, fax: +86-21-2226-0999 renesas electronics hong kong limited unit 1601-1611, 16/f., tower 2, grand century place, 193 prince edward road west, mongkok, kowloon, hong kong tel: +852-2265-6688, fax: +852 2886-9022 renesas electronics taiwan co., ltd. 13f, no. 363, fu shing north road, taipei 10543, taiwan tel: +886-2-8175-9600, fax: +886 2-8175-9670 renesas electronics singapore pte. ltd. 80 bendemeer road, unit #06-02 hyflux innovation centre, singapore 339949 tel: +65-6213-0200, fax: +65-6213-0300 renesas electronics malaysia sdn.bhd. unit 1207, block b, menara amcorp, amcorp trade centre, no. 18, jln persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: +60-3-7955-9390, fax: +60-3-7955-9510 renesas electronics india pvt. ltd. no.777c, 100 feet road, hal ii stage, indiranagar, bangalore, india tel: +91-80-67208700, fax: +91-80-67208777 renesas electronics korea co., ltd. 12f., 234 teheran-ro, gangnam-gu, seoul, 135-080, korea tel: +82-2-558-3737, fax: +82-2-558-5141 sales offices ? 2016 renesas electronics corporation. all rights reserved. colophon 5.0

▲Up To Search▲

Price & Availability of PS2913-1-V-AX

	To Download PS2913-1-V-AX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .